forums.naturalpoint.com

Well Im a bit disappointed in the TrackIR3pro WITH Vector expansion. Ive installed the latest version of software but here is what I experience.....

Using FS2004....

Basically everything looks like its shaking back and forth and get extremely worse during a turn of the airplane. Some planes are worse than others but even in the Cessna it shakes really bad. I spent a good penny on this product and would like to know if there is anything that can be done. Also - As soon as I hit F9 and disable TrackIR - everything is normal.

Thanks
Tony Padovano

My System Specs:
P4 3.2 Intel
ATI X800XT PE Video
1 gig PC3400 Ram

Have you tried setting a small deadzone on all the axis to see if it was getting hung up in the center position?

golfcart22,

Do you have Active Camera installed?

Have you tried setting a small deadzone on all the axis to see if it was getting hung up in the center position?

No have not -

Do you have Active Camera installed?

Yes I do - Is that causing a conflict?

Tony, its most likely the internal view in Active Camera causing the problem. Both it and the TrackIR are trying to affect the view, so you need to disable the internal view.

yes that was the problem...

Thanks for all who replied.

Tony