forums.naturalpoint.com

Hi Wayne

I always appreciate your help and effort.

I wish my report would be the help for developing the better driver. I report one more symptom I found just before.

I am not sure this is just my case. When I use v3.13 there were no problems, but after installed new driver (not beta) I found the driver v4.0.021 conflict with NVIDIA 3D stereo driver v61.76 used by 3D glasses (like the one from eDimensional for example).

Once, I edited a profile with the head display window opened, the function of 3D stereo locked up. So, in the simulation I can not use my 3D glasses.
Without editing the TrackIR profiles in the profiles display tab or without using the heads display window, all 3d stereo functions work well.

Thanks
Seyoung

[ January 17, 2005, 02:18 AM: Message edited by: Seyoung ]

Since installing v.4 my nVidia 3D-driver (dunno which version, gotta look this up) causes trouble, too.

I get an error-log after each start-up (saying "version mismatches with nv4_disp, Stereo won't work"), and I even CTD'd once.

I didn't have this issue before installing v.4 parallel to v.3, but this might be just coincidence.

(My 3D-drivers are a different version-no. than my normal drivers - dunno whether this can cause problems.)

I believe we have some of the eDimensional glasses around the office, I will take a look at this.

I will have a talk with eDimensional tomorrow to see if they have had any users with this problem.

Just an addition: I dor one don't use the e-Dimensional glasses but ELSA's (old) Revelator glasses; they don't require a special ELSA-driver but just nVidia's 3D-drivers.

Thank you for reply Wayne.
I found additional information.
The only thing causing the conflict with NVIDIA 3d stereo is the heads display window of the TrackIR driver v4.0.
Editing profiles without heads window does not cause the problem.
Thanks

seyoung