TIR 1 jitters eliminated
Posted: Sun Dec 07, 2003 4:23 am
~S!
I found a cure for my jitters with TIR 1 and 2.11
I must say they were not that bad with 2.11 but were still noticable.
but any other version over this was unusable for me
After the patch for FB was installed I found I was having sound problems and in the process of fixing this problem I accidently fix the jitters
I was turning the sound acceleration sliders down 1 notch at a time and testing the game after each change
In the process of doing this I found that TIR was getting smoother as I was moving the slider down and doing each test
The smoothest and most fluid movement was at no acceleration, but my sound was droping out
1 notch up at basic acceleration was very good for TIR and sound for me
system spec
A7V333
amd 2800 xp barton
512 meg pc3200
windows 98 se
GF FX 5900 u 256 meg
sants crus sound card
dx9.0b
My ? is this
what is the correlation between TIR and sound acceleration
I checked IRQs and and sound and vid card are not sharing
I,ll test the newer version of TIR software and get back after testing
~S!
I found a cure for my jitters with TIR 1 and 2.11
I must say they were not that bad with 2.11 but were still noticable.
but any other version over this was unusable for me
After the patch for FB was installed I found I was having sound problems and in the process of fixing this problem I accidently fix the jitters
I was turning the sound acceleration sliders down 1 notch at a time and testing the game after each change
In the process of doing this I found that TIR was getting smoother as I was moving the slider down and doing each test
The smoothest and most fluid movement was at no acceleration, but my sound was droping out
1 notch up at basic acceleration was very good for TIR and sound for me
system spec
A7V333
amd 2800 xp barton
512 meg pc3200
windows 98 se
GF FX 5900 u 256 meg
sants crus sound card
dx9.0b
My ? is this
what is the correlation between TIR and sound acceleration
I checked IRQs and and sound and vid card are not sharing
I,ll test the newer version of TIR software and get back after testing
~S!