forums.naturalpoint.com

Just installed TrackIR 4 with latest drivers. It works fine until I look down and then it just freezes. I opened the heads screen and it shows that as I look down my 'real' head begins to look right as I move it down. Problem is my actual real head is NOT moving right as I look down.

If I look down too far the thing just freezes on me. Anyone else have this problem or is it just my unit...which by the way did not arrive factory sealed from Edimensional. There are some fine scratches on the unit as I recieved it. Should i return?

Please send the following information to , support@NaturalPoint.com

What is the Serial # of the device?
It should be located on the end of the cable, near the USB plug, or on the underside of the device.

Could you send us a copy of the Setupapi.log file?
It should be located in the C:\Windows folder

Have you tried the device on another system?

Are you plugging in directly to the system, or are you using a hub?

Have you tried isolating the device on the USB ports?

Have you tried turn off any kind of power save feature for your USB ports?

In the "Device Manager" you can right click the "USB Hub"(s) that show and turn off the power saving feature that turn those ports off when idle. Sometimes that has an impact on the connectivity of the devices.

Could you attach a screen shot of your device manager, and tracking screen?

To make Print Screen work, you must save an image of what's displayed on-screen to the clipboard and then paste it into a document where it can be printed.

Windows Help: Print Screen

To do this, follow this procedure:

1. Maximize the window you'd like to capture.
2. To copy/capture the current window, hold down ALT + Print Scrn at the same time. To capture the entire screen, just press Print Scrn alone.
3. Open a new document in MS Paint, MS Word, MS Photo Editor, or Adobe PhotoShop.
4. Paste the screen shot by holding down CTRL and V at the same time.
5. Save the document as a .JPG or .JPEG file and send it in.