forums.naturalpoint.com

Have the TrackIR3.
The only problem I have is that even though I have checked the "Run at Startup" option, the natural point software never starts at startup.

Anybody else get this?
Thanks,

Which version of the TrackIR software are you running?

What OS are you running?

Have you tried placing the TrackIR shortcut in the startup folder?

trackir 3.13
Windows XP SP2
I place trackir in the startup folder, that is ok but it don't start with the saved parameter in the default and auto loaded profile

So what occurs if you load a auto load profile, such as FS2004, then restart the software?

Manualy it's ok but no change with the auto load. In fact the soft don't save the change.

Have you tried a clean install of the software?


Remove the TrackIR software by doing the following:
a. Click "Start"
b. Click on the "Control Panel"
c. Click "Add/Remove Programs"
d. Find "TrackIR" and click "Change/Remove"
e. Once launched it will give the option to completely remove it.
f. Delete the NaturalPoint folder at the following location, C:\Program Files\NaturalPoint
g. Reinstall the latest version of the NaturalPoint software, that is compatible with your hardware.

http://www.naturalpoint.com/trackir/06- ... nuals.html

http://www.naturalpoint.com/trackir/06- ... ls-v3.html

I've done this several time but no change.

Have you tried the 4.1.030 software?

no
Is it the same usage than 3.13

If you have a TrackIR 3 unit, I would upgrade to the 4.1.30
software