Vista 64-bit - SmartNAV - Beta support

Here you can talk about SmartNav and related products and issues not covered by other forums.
Post Reply
VincentG
Posts: 7728
Joined: Mon Jul 17, 2006 5:00 am
Location: Corvallis, Oregon

Vista 64-bit - SmartNAV - Beta support

Post by VincentG » Wed Mar 21, 2007 11:11 am

Please note that this is very beta support.....

1 � Download and install the latest version of the SmartNAV software,

http://www.naturalpoint.com/smartnav/su ... loads.html

2 - Copy the following files to the system desktop, and extract,

http://media.naturalpoint.com/software/ ... rs_pre.zip

3 - Copy the extracted files to the following location; C:\Program Files\NaturalPoint\SmartNAV\Drivers (If asked overwrite the files)

4 - Plug in SmartNAV hardware to USB port.

5 - When the hardware wizard asks for drivers, point to file location that you copied the files to (C:\Program Files\NaturalPoint\SmartNAV\Drivers)

6 - If Vista does not ask for driver file location, Right Click on Computer -> Select properties -> then on the left hand side select Device Manager.-> Under DM -> Select Universal Serial Bus Controllers -> Then right click on the SmartNAV -> Select update driver -> then point to the file location for the copied drivers.

7 - Start the SmartNAV software

8 � You should now have support for SmartNAV within 64-bit Vista

9 � If you have any issues with the drivers, please email support@NaturalPoint.com

Post Reply