Page 1 of 1
How to get a smooth response from Trackir 3??
Posted: Tue Apr 03, 2007 10:07 am
by Streamer
I mean, I move my head and the entire cokcpit go crazy, I want to reproduce the natural move from my head but I just turn left the vector and the cokcpit go crazy..obviously this is not a help about racing...any advice? Regards and sorryif maybe is a silly question...
Re: How to get a smooth response from Trackir 3??
Posted: Tue Apr 03, 2007 10:47 am
by VincentG
1 - Check the tracking screen, TrackIR software -> View -> Tracking, there should only be 1 or 3 green reflector here (depending on whether you have the Vector expansion enabled on the system.
2 - Are you using a single dot, Vector Clip, or TrackClip Pro?
3 - On the individual profiles (Flight, Racing, Default, etc.); Do you have the TrackClip Pro selected or Vector selected on the motion tab.
Re: How to get a smooth response from Trackir 3??
Posted: Tue Apr 03, 2007 5:46 pm
by Streamer
Hi Vincent
1) Three green points and one red in the middle ( I guess, from the NP cap)
2) Vector
3) Vector
Re: How to get a smooth response from Trackir 3??
Posted: Wed Apr 04, 2007 12:53 pm
by VincentG
Ok, the middle red one needs to go away, i.e. cover it up with a piece of tape or try a different hat. You want to only have the 3 green tracking dots on the screen, otherwise the unit behaves erratically.