forums.naturalpoint.com

This morning I decided to reinstall my USB drivers for my motherboard since I found it was not using 2.0 support for a number of my devices (not to mention I was tired of that box popping up saying I should plug my TIR 4 into a 2.0 port to get better performance... thing is - it IS plugged into one).

Well, all went well in the reinstall, and then I plugged in the TIR 4, told windows to automatically install the TIR 4 driver... went into the TIR 4 software and... well... My axes are ALL reversed, except up and down (this is the only axis that works normally).

I reinstalled the TIR 4 software (uninstall, re-install) multiple times to no avail.

They're reversed!

Now, you'll probably say just click the reverse box in the software. That is easy enough... BUT - I have many different TIR profiles set up already - and will have to manually edit each one, and solve this via software emulation rather than the axes being detected properly in the first place - like they used to be.

I'm stumped - any help here to get it normalized would be appreciated.

System specs:

X2 4400+, 7900 GTX, 2 gigs ram, Windows XP SP 2, TIR 4 etc

I do not have a Track Clip Pro, and I am using the latest TIR Software, version 4.1.030 Final B

Look in the folling location, and see if the TrackIR set set to anything besides 0.

TrackIR software -> View -> Tracking -> Settings. Normally, the camera rotation should be set to 0.

I checked that setting and it was set to 0...

Hmmmm....

So the View -> Tracking screen is still showing just the 3 green dots, no red.

1 dot on top, 2 underneath.....

Vector selected in the profiles, not TrackClip Pro?

Hmmmm....

So the View -> Tracking screen is still showing just the 3 green dots, no red.

1 dot on top, 2 underneath.....

Vector selected in the profiles, not TrackClip Pro?

Yup, the tracking screen shows just the 3 dots, one on top two underneath - it is just when I move my head their direction of movement is reversed on the left and right axis.

Vector? Not sure what you mean here - but yes, I'm not using a trackclip pro.

In the profiles, flight, default, etc., is vector selected?

In the profiles, flight, default, etc., is vector selected?

Yes, Vector is selected in all my profiles... Apologize for the delay.

Any ideas?

Remove the TrackIR software by doing the following:
a. Click "Start"
b. Click on the "Control Panel"
c. Click "Add/Remove Programs"
d. Find "TrackIR" and click "Change/Remove"
e. Once launched it will give the option to completely remove it.
f. Delete the NaturalPoint folder at the following location, C:\Program Files\NaturalPoint
g. Download and reinstall the software from the following location,
http://www.naturalpoint.com/trackir/06- ... nuals.html