Page 1 of 1
Footswitch and Ergoclick
Posted: Mon Feb 13, 2006 12:20 pm
by curetzky
I own an AT and would like to know if you can use a Footswitch with a ErgoClick using a Y cable?
ChuckU
32198
Re: Footswitch and Ergoclick
Posted: Tue Feb 14, 2006 4:07 am
by kevin
The ErgoClick is a USB switch and can be used on any PC computer with a USB port. No SmartNAV is needed to use the ErgoClick.
If you get our single action foot pedals they will connect to the SmartNAV AT via the y-cable.
If you get our dual action USB foot pedals they can be used on any PC with a USB port.
Hope this helps.
Re: Footswitch and Ergoclick
Posted: Fri Mar 31, 2006 5:58 pm
by Kingrudolf
Can I use two footclicks (imaging left and right click) at the same time? That way I won't have to use the Dwell software.. right?
Re: Footswitch and Ergoclick
Posted: Mon Apr 03, 2006 4:20 am
by kevin
Hello,
Yes, I would suggest a SmartNAV EG and Two single action foot swtiches for you.
The two switches can do right or left click, and can be re-programmed through the SmartNAV software if you ever wanted to change that.
Best,
Kevin