forums.naturalpoint.com

Hi,

I used TrackIR for a year and a half without any major issues. Now I transferred my FS to anoother computer and installed the TrackIR drivers and trackIR. It went well for some minutes and then the divice went compltely black.

When I connect it to the new computer there is ablsolutely no response. When i connect it to the old computer I get a weak red light on the main red LCD but nothing else.

The TrackIR interface says no device detected.

Have I killed the hardware device by connecting it to the newer computer (and if so why) or is there a way to reboot it? What do you suggest (other than buying a new one)

Thanks

Andras

Please send the following information to support -

What is the Serial # of the device?
It should be located on the end of the cable, near the USB plug, or on the underside of the device.

Could you send us a copy of the Setupapi.log file?
It should be located in the C:\Windows folder

Have you tried the device on another system?

Are you plugging in directly to the system, or are you using a hub?

Have you tried isolating the device on the USB ports?

Have you tried turn off any kind of power save feature for your USB ports?

In the "Device Manager" you can right click the "USB Root Hub"(s), that show, and then select properties. On the power management tab, uncheck the box that allows the computer to turn off the USB port to save power (i.e. uncheck the box). Sometimes that has an impact on the connectivity of the devices.

Could you attach a screen shot of your Device Manager (showing USB), and tracking screen (TrackIR software -> View -> Tracking)?

To make Print Screen work, you must save an image of what's displayed on-screen to the clipboard and then paste it into a document where it can be printed.

Windows Help: Print Screen

To do this, follow this procedure:

1. Maximize the window you'd like to capture.
2. To copy/capture the current window, hold down ALT + Print Scrn at the same time. To capture the entire screen, just press Print Scrn alone.
3. Open a new document in MS Paint, MS Word, MS Photo Editor, or Adobe PhotoShop.
4. Paste the screen shot by holding down CTRL and V at the same time.
5. Save the document as a .JPG or .JPEG file and send it in.