Page 1 of 1
SmartNav 4:AT - Program Crashing
Posted: Thu Dec 09, 2010 7:10 pm
by davidhaigalexander
I installed the program but every time I click on the options or load a profile under the setup tab:
http://www.naturalpoint.com/smartnav/su ... up_Tab.gif
Re: SmartNav 4:AT - Program Crashing
Posted: Fri Dec 10, 2010 2:03 pm
by VincentG
Which version of the software are you using? (click on the about button)
Re: SmartNav 4:AT - Program Crashing
Posted: Fri Dec 10, 2010 8:57 pm
by davidhaigalexander
I am using the version that I downloaded off the NaturalPoint site:
SmartNAV_3.20.037.1.Final
SmartNav - Support - Downloads
A few additional details:
I might have plugged the device in before installing the software, however I followed the troubleshooting instructions in the User Manual to check the drivers, uninstall software and reboot per chapter:
User Manual - Troubleshooting
[9.1 Problem : Software loads and runs, but LED indicator light on unit does not come on. OR you receive a message saying: The system cannot find the file specified or the software could not connect with the SmartNav device]
That said, I didn't have driver issues in Device Manager per step (1b.) and (1c.)
Re: SmartNav 4:AT - Program Crashing
Posted: Mon Dec 13, 2010 6:03 pm
by VincentG
Which version of Windows are you running?
Have you tried uninstalling the SmartNAV software, and installing the 3.20.037 software?
http://www.naturalpoint.com/smartnav/su ... chive.html
What other applications do you have running on the system?
Are you connected directly to the PC, or are you using a hub?
Are you logged onto the system as an admin?
Re: SmartNav 4:AT - Program Crashing
Posted: Mon Dec 13, 2010 8:55 pm
by davidhaigalexander
Windows XP, 2002, SP3 - logged in as Admin
Yes - uninstalled and rebooted and reinstalled probably 20 times.
I am connecting directly to the PC - no hub.
Here is a list of my programs I use:
Re: SmartNav 4:AT - Program Crashing
Posted: Tue Dec 14, 2010 12:31 am
by Birch
Hello,
I'm not sure if you noted the exact version in Vince's previous post so I wanted to check. Vince recommended installing 3.20.037 instead of 3.20.037
.1 to see if that makes a difference on the crashing. Have you done that specifically?
The 3.20.037 version is an older release and 3.20.037.1 is the most recent release. You might also consider trying 3.20.035 to see if that makes a difference. Its in the download archive.
http://www.naturalpoint.com/smartnav/su ... chive.html
Re: SmartNav 4:AT - Program Crashing
Posted: Wed Dec 15, 2010 8:55 am
by davidhaigalexander
Hi Birch,
Yes, I didn't notice the difference in versions in Vince's post before but I actually got it to work somehow (with .1) - not sure how but it's working now. I may have not installed the drivers correctly (the windows XP install, after the software install).
Thanks for your help!
David
