Track IR5 Causing win7 computer to freeze
Posted: Thu Dec 30, 2010 2:43 am
I recently purchased track IR5 for use with DCS A10. I installed the beta drivers, and everything appears to work fine. However, after about 30 minutes, my machine seizes up. The only way to get out of it is to force a reboot.
The strange part is that upon rebooting, I get stuck with a disk read error, and cannot boot into windows ("A disk read error occurred, Press Ctrl + alt + del to reboot). This persists upon rebooting until I unplug the track IR device from my computer. Once unplugged, everything functions perfectly. This has happened multiple times and I can confirm that it is the track IR device that needs to be unplugged for it to proceed (I have tried different ports as well).
This is the only consistent event that I can find relating to the issue in the logs:
Faulting application name: Launcher.exe_DCS: A-10C WARTHOG, version: 1.1.0.3, time stamp: 0x4d10c086
Faulting module name: NPClient64.dll, version: 3.2.38.0, time stamp: 0x4d104fc8
Exception code: 0xc0000005
Fault offset: 0x00000000000025b4
Faulting process id: 0x594
Faulting application start time: 0x01cba7f85bcaef60
Faulting application path: E:\A10\DCS A-10C Beta\bin\Launcher.exe
Faulting module path: C:\Program Files (x86)\NaturalPoint\TrackIR5\NPClient64.dll
Report Id: 571ceaa4-13f1-11e0-b2a6-001fbc00ce66
I have only tried using track IR5 with DCS A10, however I know I have arma lying around somewhere. I will give it a try with the beta drivers and see if the same issue persists.
Any other ideas?
System specs:
Windows 7 64 bit
Intel i7 @ 3.8 HT enabled
6 GB RAM
GTX 295 (260.99 drvr version)
The strange part is that upon rebooting, I get stuck with a disk read error, and cannot boot into windows ("A disk read error occurred, Press Ctrl + alt + del to reboot). This persists upon rebooting until I unplug the track IR device from my computer. Once unplugged, everything functions perfectly. This has happened multiple times and I can confirm that it is the track IR device that needs to be unplugged for it to proceed (I have tried different ports as well).
This is the only consistent event that I can find relating to the issue in the logs:
Faulting application name: Launcher.exe_DCS: A-10C WARTHOG, version: 1.1.0.3, time stamp: 0x4d10c086
Faulting module name: NPClient64.dll, version: 3.2.38.0, time stamp: 0x4d104fc8
Exception code: 0xc0000005
Fault offset: 0x00000000000025b4
Faulting process id: 0x594
Faulting application start time: 0x01cba7f85bcaef60
Faulting application path: E:\A10\DCS A-10C Beta\bin\Launcher.exe
Faulting module path: C:\Program Files (x86)\NaturalPoint\TrackIR5\NPClient64.dll
Report Id: 571ceaa4-13f1-11e0-b2a6-001fbc00ce66
I have only tried using track IR5 with DCS A10, however I know I have arma lying around somewhere. I will give it a try with the beta drivers and see if the same issue persists.
Any other ideas?
System specs:
Windows 7 64 bit
Intel i7 @ 3.8 HT enabled
6 GB RAM
GTX 295 (260.99 drvr version)