TIR 4
Posted: Thu Jun 09, 2011 4:21 am
Hi NP Forum!!
I'm having issues with a TrackIR 4 my friend lent me - he has issues with getting it working and isn't so flash with computers!
System: Windows 7 x64 ASRock on P67 Pro3 and i5-2500k
I installed TrackIR 4 software before realising V5 would be more appropriate. I uninstalled V4 and installed V5. I plugged in the Track IR 4 Pro directly to the motherboard. Windows completed installing software. The bottom LED began flashing blue intermittently - 1 per 8 secs. No other response could be found. I searched for an found various instructions involving disconnecting, uninstalling and rebooting. I uninstalled 5, reinstalled 5, booted unplugged, plugged in, installed V4, restarted, plugged in/out etc. The only responses I get now are:
Currently:
The bottom blue light flashes intermittently. When I initially start up or change profile in TrackIR v4 it flashes rapidly for about 1-2 secs after which it will revert to the same.
TIR 4 does not indicate there is a device connected but does show Vector expansion is active.
[img:center]https://lh3.googleusercontent.com/-blXe ... 0/TIR1.JPG[/img]
TrackIR v5 shows that a TIR4 PRO is connected, with default profile and no title. There is no display of anything on the right. When I press F9 for pause a red light comes on at the top. This is bright and stays on until the button is toggled again. TrackIR 5 being on or off doesn't seem to affect the flashing.
[img:center]https://lh4.googleusercontent.com/-8nAr ... 0/TIR2.JPG[/img]
Any help I could get with this would be most appreciated!
Andrew
I'm having issues with a TrackIR 4 my friend lent me - he has issues with getting it working and isn't so flash with computers!
System: Windows 7 x64 ASRock on P67 Pro3 and i5-2500k
I installed TrackIR 4 software before realising V5 would be more appropriate. I uninstalled V4 and installed V5. I plugged in the Track IR 4 Pro directly to the motherboard. Windows completed installing software. The bottom LED began flashing blue intermittently - 1 per 8 secs. No other response could be found. I searched for an found various instructions involving disconnecting, uninstalling and rebooting. I uninstalled 5, reinstalled 5, booted unplugged, plugged in, installed V4, restarted, plugged in/out etc. The only responses I get now are:
Currently:
The bottom blue light flashes intermittently. When I initially start up or change profile in TrackIR v4 it flashes rapidly for about 1-2 secs after which it will revert to the same.
TIR 4 does not indicate there is a device connected but does show Vector expansion is active.
[img:center]https://lh3.googleusercontent.com/-blXe ... 0/TIR1.JPG[/img]
TrackIR v5 shows that a TIR4 PRO is connected, with default profile and no title. There is no display of anything on the right. When I press F9 for pause a red light comes on at the top. This is bright and stays on until the button is toggled again. TrackIR 5 being on or off doesn't seem to affect the flashing.
[img:center]https://lh4.googleusercontent.com/-8nAr ... 0/TIR2.JPG[/img]
Any help I could get with this would be most appreciated!
Andrew