new drivers drifting at centre?

[Mystik]

S!
I have been finding that my TIR3 pro with the new release drivers v4 .21, seem to have a drifting problem in the centre area.

ie
Track left or right and return to centre... the outer sections seem to return towards centre ok but from about 2/3 the way in, things slow down dramatically and even when the red and yellow lines are at centre the head still "drifts" in very slowly, and even when red and yellow lines are at rest, the dot in the view window at rest, the head justs drifts and continues to drift past what it should see as centre.

return to v4 .20 drivers and all is fine, as it is meant to be.

[ January 23, 2005, 08:36 AM: Message edited by: Mystik ]

[Barred]

I had the same thing happen, though the 'drift' is not as bad with the Vector. I too was using the 4.21.

[Wayne]

Mystik,

Is your smoothing set very high? A setting of around 30 works well.

[Mystik]

S!

Thank you for your reply

Running in stock settings, not a thing modified.
Profiles, smoothing, pixel size, etc are all at default settings.
The only mod was to the Centre/ Disable/ Precision keys. These I changed to get around X52 profiling and "Key trapping" has been disabled.
The listed keys are not used ingame and the drifting occurs with or without game running.

I am happy with the previous release though.

[Mystik]

Hi
A quick update.

Purchased the Vector Expansion, as it now is available in Oz.
Reinstalled Software v 4 Build .21, as per the advice contained with the kit and all the drifting that I found without VE is now gone.

S!