Run at Startup

[artafel]

Have the TrackIR3.
The only problem I have is that even though I have checked the "Run at Startup" option, the natural point software never starts at startup.

Anybody else get this?
Thanks,

[VincentG]

Which version of the TrackIR software are you running?

What OS are you running?

Have you tried placing the TrackIR shortcut in the startup folder?

[artafel]

trackir 3.13
Windows XP SP2
I place trackir in the startup folder, that is ok but it don't start with the saved parameter in the default and auto loaded profile

[VincentG]

So what occurs if you load a auto load profile, such as FS2004, then restart the software?

[artafel]

Manualy it's ok but no change with the auto load. In fact the soft don't save the change.

[VincentG]

Have you tried a clean install of the software?


Remove the TrackIR software by doing the following:
a. Click "Start"
b. Click on the "Control Panel"
c. Click "Add/Remove Programs"
d. Find "TrackIR" and click "Change/Remove"
e. Once launched it will give the option to completely remove it.
f. Delete the NaturalPoint folder at the following location, C:\Program Files\NaturalPoint
g. Reinstall the latest version of the NaturalPoint software, that is compatible with your hardware.

http://www.naturalpoint.com/trackir/06- ... nuals.html

http://www.naturalpoint.com/trackir/06- ... ls-v3.html

[artafel]

I've done this several time but no change.

[VincentG]

Have you tried the 4.1.030 software?

[artafel]

no
Is it the same usage than 3.13

[VincentG]

If you have a TrackIR 3 unit, I would upgrade to the 4.1.30
software