Bought trackIR4 a few weeks ago and suddenly it stopped responding.
(Blue light continues to flash at the bottom of the unit and when you start the software program the green light stays lit for a couple of seconds then goes off.)
I have searched the forums and have tried all the suggestions and all the re-installes.Also installed on another PC and still a no go.
Its a great product and would like to have it working again.
Help Please!
Track IR4 Failure
Re: Track IR4 Failure
Please email support directly, with the following information.
What is the Serial # of the device?
It should be located on the end of the cable, near the USB plug, or on the underside of the device.
Could you send us a copy of the Setupapi.log file?
It should be located in the C:\Windows folder
Have you tried the device on another system?
Are you plugging in directly to the system, or are you using a hub?
Have you tried isolating the device on the USB ports?
Have you tried turn off any kind of power save feature for your USB ports?
In the "Device Manager" you can right click the "USB Hub"(s), that show, and then select properties. On the power management tab, uncheck the box that allows the computer to turn off the USB port to save power (i.e. uncheck the box). Sometimes that has an impact on the connectivity of the devices.
Could you attach a screen shot of your device manager (showing USB), and tracking screen (TrackIR software)?
To make Print Screen work, you must save an image of what's displayed on-screen to the clipboard and then paste it into a document where it can be printed.
Windows Help: Print Screen
To do this, follow this procedure:
1. Maximize the window you'd like to capture.
2. To copy/capture the current window, hold down ALT + Print Scrn at the same time. To capture the entire screen, just press Print Scrn alone.
3. Open a new document in MS Paint, MS Word, MS Photo Editor, or Adobe PhotoShop.
4. Paste the screen shot by holding down CTRL and V at the same time.
5. Save the document as a .JPG or .JPEG file and send it in.
What is the Serial # of the device?
It should be located on the end of the cable, near the USB plug, or on the underside of the device.
Could you send us a copy of the Setupapi.log file?
It should be located in the C:\Windows folder
Have you tried the device on another system?
Are you plugging in directly to the system, or are you using a hub?
Have you tried isolating the device on the USB ports?
Have you tried turn off any kind of power save feature for your USB ports?
In the "Device Manager" you can right click the "USB Hub"(s), that show, and then select properties. On the power management tab, uncheck the box that allows the computer to turn off the USB port to save power (i.e. uncheck the box). Sometimes that has an impact on the connectivity of the devices.
Could you attach a screen shot of your device manager (showing USB), and tracking screen (TrackIR software)?
To make Print Screen work, you must save an image of what's displayed on-screen to the clipboard and then paste it into a document where it can be printed.
Windows Help: Print Screen
To do this, follow this procedure:
1. Maximize the window you'd like to capture.
2. To copy/capture the current window, hold down ALT + Print Scrn at the same time. To capture the entire screen, just press Print Scrn alone.
3. Open a new document in MS Paint, MS Word, MS Photo Editor, or Adobe PhotoShop.
4. Paste the screen shot by holding down CTRL and V at the same time.
5. Save the document as a .JPG or .JPEG file and send it in.
Re: Track IR4 Failure
replied in email....