Help
Re: Help
Each Axis of head movement that the TrackIR software is able to track can be adjusted to have a faster and slower response to your real head movement. The TrackIR software uses an Acceleration Curve to amplify your real head movement, this allows complete control of the in-game view with only a few degrees of head movement. Changing the Acceleration Curve for an Axis allows you to fine-tune the amount of head movement used to control your view, it also be used to create Dead-Zones which help keep the view stable for types of use like Flight Simulation combat.
Hint : You can preview the effects of your changes in both the "Heads" and "Gauges" pop-up windows while you are using the Curve Editor. This will help you understand the how the changes affect your view control motion. You can find out more about these windows in Section 5.5.3 and Section 5.5.4
In order change an Acceleration Curve, you need to open the Acceleration Curve editor. This is done by selecting (clicking once) the Axis you wish to edit from the Axis list and pressing the "Edit" button in the Motion Tab of the Edit Profile Window (you must have a profile open for edit).
The Acceleration Curve editor has a graph which displays how much the motion for the Axis is amplified. The horizontal center of the graph is the origin of the Axis, this corresponds to the "Center" of your head movement that is set by pressing the Center Hotkey. Head movement away from the center of the Axis is represented as moving left or right from the origin on the graph.
The control points on the graph allow you to edit the curve by clicking and dragging the points, or by using the Position and Value controls to select and change the values of individual edit points. Moving a point "up" on the graph will increase the amount of amplification for head movement. Moving a point "down" on the graph will reduce the amount of amplification, moving a point to the bottom of the graph (zero) will prevent head movement from being sent to the TrackIR Enhanced Title while your head is within that area of the Axis.
Presets, which can be loaded using the Acceleration drop-down list, should cover basic tracking needs.
The Copy button and drop-down list can be used to copy your Acceleration curve to other Axes.
Note : As the speed of view control is increased or decreased, you may wish to adjust the amount of smoothing that is used. Increasing the speed will often require an increase in the amount of smoothing to ensure that the view control remains stable and smooth. For details on how
Hint : You can preview the effects of your changes in both the "Heads" and "Gauges" pop-up windows while you are using the Curve Editor. This will help you understand the how the changes affect your view control motion. You can find out more about these windows in Section 5.5.3 and Section 5.5.4
In order change an Acceleration Curve, you need to open the Acceleration Curve editor. This is done by selecting (clicking once) the Axis you wish to edit from the Axis list and pressing the "Edit" button in the Motion Tab of the Edit Profile Window (you must have a profile open for edit).
The Acceleration Curve editor has a graph which displays how much the motion for the Axis is amplified. The horizontal center of the graph is the origin of the Axis, this corresponds to the "Center" of your head movement that is set by pressing the Center Hotkey. Head movement away from the center of the Axis is represented as moving left or right from the origin on the graph.
The control points on the graph allow you to edit the curve by clicking and dragging the points, or by using the Position and Value controls to select and change the values of individual edit points. Moving a point "up" on the graph will increase the amount of amplification for head movement. Moving a point "down" on the graph will reduce the amount of amplification, moving a point to the bottom of the graph (zero) will prevent head movement from being sent to the TrackIR Enhanced Title while your head is within that area of the Axis.
Presets, which can be loaded using the Acceleration drop-down list, should cover basic tracking needs.
The Copy button and drop-down list can be used to copy your Acceleration curve to other Axes.
Note : As the speed of view control is increased or decreased, you may wish to adjust the amount of smoothing that is used. Increasing the speed will often require an increase in the amount of smoothing to ensure that the view control remains stable and smooth. For details on how
