Hi,
My TrackIR 3 stopped working some days after I installed it into Vista PC. Computer still finds the device, and from the device manager it looks like to be ok. But when I start the TrackIR software, it hangs completely. No red lights, nor green light gets turned on.
I've reinstalled software several times 4.1.030Final.B and I also tried it in my old PC in which it's now neither working anymore. Not even with the original CD version 4.1.025. On both PC's TrackIR software says in Device info line: No device detected, or sometimes OptiTrack Unknown : 8618883. Status line at the bottom says "Configuring", but software just hangs there. After a while, TrackIR software turns to gray and says (not responding).
Event wiever looks something like this (Free translation from Finnish):
Logname: Application
Source: Application Hang
Date: 29.2.2008 20:45:51
Eventid: 1002
Taskclass: (101)
Level: Error
Keywords: Classic
Program TrackIR.exe, versio 0.0.0.0, stopped connecting Windows, so it was shut down.
Event Xml:
1002
2
101
0x80000000000000
3924
Application
Home-PC
TrackIR.exe
0.0.0.0
13d4
01c87b03003d6618
6486
55006E006B006E006F0077006E0000000000
istalllog.txt
3-1-2008
Install Log Entry Begin (Installation):
DirectX version : 09
DirectX version is okay
OS = Win 2K/XP
Component USB from 0 to 1
Component APP from 0 to 1
Component DOCS from 0 to 1
Component MSFS2002 from 0 to 0
Component PROFILES from 0 to 1
Install USB Drivers for 2K/XP
ReInstallUSBDevices loaded setuphlp.DLL :
Error = 0
RegisterDriverINF UpdateDriver4PnP Succeeded :
USB\VID_131D&PID_0155 AND C:\Program Files\NaturalPoint\TrackIR4\Drivers\NPUSB3.inf
ReInstallUSBDevices loaded setuphlp.DLL :
Error = 0
RegisterDriverINF UpdateDriver4PnP Failed! :
USB\VID_131D&PID_0156 AND C:\Program Files\NaturalPoint\TrackIR4\Drivers\NPUSB3.inf
Error = 183
SetupCopyOEMInfA Called
Is it possible that the TIR software makes some changes to device itself and in Vista there is some conflict that messed around this process leaving device dead.
TrackIR 3 died
Re: TrackIR 3 died
There is nothing within the TrackIR software, which directly writes to the TrackIR3 device.
Have you tried it on another system?
Have you tried it on another system?
Re: TrackIR 3 died
I've now tested it with my old PC (XP sp2) and with my portable. It's not working in these machines either. Sometimes TrackIR software says "SmartNAV and TrackIR cannot be used at same time. Close SmartNAV before running TrackIR". I don't even have SmartNAV.
Re: TrackIR 3 died
It sounds like the unit itself has failed.
Re: TrackIR 3 died
The unit seems to be so simple that it should not fail. There is no warranty anymore so I decided to take a closer look to device and opened it.
Red wire was almost cut from J1 so I resoldered it (and all others too). Obviously this did not help, but while doing this I noticed that resistor R16 is missing. Is this a defect or by design?
Red wire was almost cut from J1 so I resoldered it (and all others too). Obviously this did not help, but while doing this I noticed that resistor R16 is missing. Is this a defect or by design?
Re: TrackIR 3 died
Design - sometimes boards get reworked, after the initial design, so components are no longer required.
Re: TrackIR 3 died
This was a fun equipment, but unfortunately it's lifetime was shorter than with any other electric device I've ever owned. If the warranty period will be increased to 3 years, I might buy a new one. But with 1-year warranty, I just can't.
BTW: The electronics within camera unit are hardly worth more than 15$ (excluding the IR-camera in it). And the part that probably has failed (XC9572XL) is worth 3$. Knowing that won't make me too happy.
BTW: The electronics within camera unit are hardly worth more than 15$ (excluding the IR-camera in it). And the part that probably has failed (XC9572XL) is worth 3$. Knowing that won't make me too happy.