Hi all,
I am considering a TIR5, but do not want to have to use the vector expansion or clip (I don't like wearing headphones or hat).
Is it possible to use the TIR5 to track a single dot as I used to use with my old TIR3? I appreciate that this will not allow 6DOF, but I just want to be able to look around in yaw and pitch in the "Rise of Flight" flight sim.
I used to use a single reflector dot stuck to the bridge of my glasses when I had a TIR3, which made for a very unencumbered experience and I would like to be able to do this with a TIR5.
Is this possible? If so, how would I set it up?
Thanks in advance.
RD
TIR5 with single reflector for yaw and pitch only?
Re: TIR5 with single reflector for yaw and pitch only?
Answers own question:
Yes, it looks like using the v4 software will allow this, and it can be installed simultaneously with the v5.
Google is my friend.
Naturalpoint - Might be worth revising the v5 software to include a single dot as a target alongaside the clip and vector thingy?
Will now buy TIR5.
Cheers,
RD
Yes, it looks like using the v4 software will allow this, and it can be installed simultaneously with the v5.
Google is my friend.
Naturalpoint - Might be worth revising the v5 software to include a single dot as a target alongaside the clip and vector thingy?
Will now buy TIR5.
Cheers,
RD
Re: TIR5 with single reflector for yaw and pitch only?
Hi RocketDog:
Read with interest your post. Have a TR5 and have struggled with it for a long time. If I understand you want to use the TR5 with TR4 software. Would this enable you to simply look left or right and up and down. All I really want to do is visually find an airport that may be to the left or right of my heading as well as have the up & down for TO & Landings. If I understood what you are doing where do you get individual reflectors and place the camera. Thanks for any advice on this.
Read with interest your post. Have a TR5 and have struggled with it for a long time. If I understand you want to use the TR5 with TR4 software. Would this enable you to simply look left or right and up and down. All I really want to do is visually find an airport that may be to the left or right of my heading as well as have the up & down for TO & Landings. If I understood what you are doing where do you get individual reflectors and place the camera. Thanks for any advice on this.
-
NaturalPoint - Mike
- Posts: 1896
- Joined: Tue Feb 01, 2011 8:41 am
- Location: Corvallis, OR
Re: TIR5 with single reflector for yaw and pitch only?
If you have a TIR5, you can also edit your profile in the TrackIR 5 software, and disable the x, y, z, and roll axes.
Re: TIR5 with single reflector for yaw and pitch only?
Thanks Mike for that info. After 2 years I still struggle with TIR5. Ever since Vincent told me I had to change the CFG file in FS. All I ever wanted was to fly smooth low and slow have full panel view without having to "crank" my neck down to see the full panel.Be able to see 90-120 degrees left and right of center. Somehow these things have escaped me to this point. I continue to appreciate and respect people who enjoy this thing to the fullest. Real world flying for me is easy compared to TIR.