Hi Everybody
We have 6 OptiTracks FLEX:V100 cameras and we're thinking about getting 2 cameras more. So if we're going to get those 2 cameras they'll be R2 versions. When FLEX:V100 & V100R2 cameras are mixed up in the chain they should work. Am I right? And also we're thinking about changing lenses in those FLEX:V100 cameras to wide-angle lenses. NaturalPoint sells only lenses for V100R2 cameras. Right? So is it possible to buy R2 lenses and install them to FLEX:V100 cameras?
Any help is appreciated
FLEX:V100 & V100R2 cameras in the same chain
-
Jackbaueri_85
- Posts: 2
- Joined: Sun Jan 17, 2010 4:08 am
- Location: Finland
Re: FLEX:V100 & V100R2 cameras in the same chain
Yes, V100R2 cameras can be used in the same sync chain as V100 cameras.
Our current lens offerings don't fit in the original V100 since the lenses are too wide for the V100 LED rings. You can see this by comparing pictures of both cameras. Also note that using wider FOV lenses will reduce the accuracy of the camera some compared to the stock lenses.
Our current lens offerings don't fit in the original V100 since the lenses are too wide for the V100 LED rings. You can see this by comparing pictures of both cameras. Also note that using wider FOV lenses will reduce the accuracy of the camera some compared to the stock lenses.