skeleton

[student]

hello, wanted to record a sequence lying and I would like to know if there's any way to calibrate the skeleton without the markings on the back to avoid errors.

thank you very much

[VincentG]

You can try moving the back markers to the front

[student]

Hello, you can load rigid body ceated in Arena into software 3d Max?

Thank you very much

[VincentG]

You can set it as part of the export, as well as stream the RB data (see the streaming tab)

[student]

hello, I have a problem with the gray scale of the cameras, because when active this way, stop working, it can be?

my scheme of installation of the cameras is:
usb the computer goes hub and from here to three cameras and a hub that goes to other three cameras.

thank you very much

[VincentG]

So you have a hub, plugged into a hub?

It is highly recommended that you do not plug a hub, into a hub, but that the hubs should go directly into the PC.

[student]

Hi, sorry for my english, I need to place a second hub for the distance between the cameras, I thought it was the best solution. As I can solution?

Thank you very much

[VincentG]

If you need to add some length between the hub, and the PC, we recommend using active extension USB cables

Example -

http://www.naturalpoint.com/optitrack/s ... ables.html

http://www.naturalpoint.com/optitrack/i ... -aa-5m.jpg

[student]

Hola, tengo el problema resulto, muchas gracias, pero me gustaria saber si cuando ponia la escala de grises se quedaba colgado por que las camaras necesitan mayor intensidad, voltaje...

Muchas gracias

[student]

Hi, I have the problem solved, thank you very much, but I wonder if when he placed the gray scale that was left hanging by the cameras need more intensity, voltage ...

Thank you very much