forums.naturalpoint.com

hello, wanted to record a sequence lying and I would like to know if there's any way to calibrate the skeleton without the markings on the back to avoid errors.

thank you very much

You can try moving the back markers to the front

Hello, you can load rigid body ceated in Arena into software 3d Max?

Thank you very much

You can set it as part of the export, as well as stream the RB data (see the streaming tab)

hello, I have a problem with the gray scale of the cameras, because when active this way, stop working, it can be?

my scheme of installation of the cameras is:
usb the computer goes hub and from here to three cameras and a hub that goes to other three cameras.

thank you very much

So you have a hub, plugged into a hub?

It is highly recommended that you do not plug a hub, into a hub, but that the hubs should go directly into the PC.

Hi, sorry for my english, I need to place a second hub for the distance between the cameras, I thought it was the best solution. As I can solution?

Thank you very much

If you need to add some length between the hub, and the PC, we recommend using active extension USB cables

Example -

http://www.naturalpoint.com/optitrack/s ... ables.html

http://www.naturalpoint.com/optitrack/i ... -aa-5m.jpg

Hola, tengo el problema resulto, muchas gracias, pero me gustaria saber si cuando ponia la escala de grises se quedaba colgado por que las camaras necesitan mayor intensidad, voltaje...

Muchas gracias

Hi, I have the problem solved, thank you very much, but I wonder if when he placed the gray scale that was left hanging by the cameras need more intensity, voltage ...

Thank you very much