Strange delays after hardware upgrade

Post Reply
A.Fokker
Posts: 13
Joined: Fri May 02, 2003 5:00 am
Location: Amsterdam, Netherlands

Strange delays after hardware upgrade

Post by A.Fokker »

Hi all,
I am experiencing some strange effects upgrading my CPU from a 1.8 GHz P4 to a 2.8 GHz P4 (HT 800 MHz FSB).

There is a strange delay, 0.5 to 1 sec, in the software reacting to me moving my head.

I have used TIR for about a year with great pleasure (mostly for IL-2 FB and BoB), I also understand how all the settings work. I use no deadzone at all because with TIR normally I have complete control over my views.

Adjusting settings like speed and smoothness makes no difference.

Help!

I have tested this with several TIR drivers, 2.11, 2.12 & 2.20. The effect is allways there.

P4 2.8 HT
1024Mb Corsair Ram DDR400
Asus P4C800deluxe (Intel 875P)
Saphire 9800 PRO (Catalyst 3.8, 6.14.10.6387)
Audigy2 (Driver 5.12.1.383)
MS FFB2 USB
CH Pro Pedals USB
TrackIr 2.12b
DX9.0b
XP Pro SP1
ICAG_Frog
Posts: 2
Joined: Wed Jun 18, 2003 5:00 am

Re: Strange delays after hardware upgrade

Post by ICAG_Frog »

Hi, Fokker!

I think I have exactly the same problem. I replaced my CPU and motherboard, switching to a P 4 2.6 800 mhz FSB with an ASUS P4P800 mainboard (chipset is Intel 865), and I get the delays you describe.

I have noticed that they are much more frequent online, almost never get them when flying offline. They seem to be related to the amount of workload on the system.

It's not related to the tracking of the dot, they can happen when looking straight, i.e. when the dot is in the center of the field of tracking.

Another thing is that in enhanced mode the centering is off after one of those pauses

I have tried connecting the unit to several USB ports, with different hubs and different IRQ's.

My system:

P 4 2.6 HT

1024 MB RAM 400

ASUS P4P800

GeForce 4 Ti 4200

Onboard sound

MS Sidewinder FFB 2

XP Home SP 1

DX 9.0b
Post Reply